Firesleeve: Aerospace AS1072
High Temperature Silicone Rubber Coated Fiberglass Sleeve
High Temperature Silicone Rubber Coated Fiberglass Sleeve
Aerospace Firesleeve
SAE AS1072 Fire Sleeve is fabricated from a thicker and denser braided fiberglass yarn.
Firesleeve is available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 125 size steps.
Used in many applications; as an industrial firesleeve, marine firesleeve and aerospace firesleeve.
Firesleeve is available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 125 size steps.
Used in many applications; as an industrial firesleeve, marine firesleeve and aerospace firesleeve.
Silicone Rubber Coated Fiberglass Firesleeve Withstands 500°F/260°C continuous exposure; Molten Splash at 2200°F/1205°C for periods up to 15 minutes and short excursions to 3000°F/1650°C.
Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these firesleeve products, providing excellent burn-through protection.
This aviation grade / aerospace grade high temperature, heat & flame resistant firesleeve is manufactured to AS1072 standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75.
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
