Very High Temperature Heat Resistant Braided Heat Treated Fiberglass Sleeve: Premium Grade
This high temperature, heat & flame resistant and thermal insulating braided fiberglass sleeve is fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1000°F / 520°C. This high temperature sleeve provides protection for industrial wires, cables, hoses (hydraulics), piping and tubing. Provides thermal insulation and personnel protection.
This sleeve is heat treated, which removes impurities and organics from the sleeve and also allowing it to operate at the top end of its temperature range without shrinkage or burn-off.
The standard wall thickness is 1/32" (0.032"), (0.81mm). Thin wall thickness is 1/64" (0.015"), (0.38mm).
This material resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable. The base fiber is manufactured to the specifications of ASTM D-578, ASTM committee D13, and subcommittee D13.18.
This sleeve is heat treated, which removes impurities and organics from the sleeve and also allowing it to operate at the top end of its temperature range without shrinkage or burn-off.
The standard wall thickness is 1/32" (0.032"), (0.81mm). Thin wall thickness is 1/64" (0.015"), (0.38mm).
This material resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable. The base fiber is manufactured to the specifications of ASTM D-578, ASTM committee D13, and subcommittee D13.18.
High Temperature Heat
Treated Fiberglass Sleeve
Treated Fiberglass Sleeve
