Firetape: High Temperature Silicone Rubber Coated Fiberglass
Knitted Tape & Wrap: Non-Adhesive
Knitted Tape & Wrap: Non-Adhesive
Knitted fiberglass (fibreglass or glass-fibre) tape coated with high temperature silicone rubber is the perfect choice for protecting hydraulic hoses and lines, pneumatic lines, fuel & oil lines, brake lines, wires and cables from exposure to high and extreme heat conditions. The extra thick special formulation of silicone rubber sheds molten metals, slag, welding splatter, electrical or grinding sparks and contamination. This tape also provides protection from ozone, UV and abrasion.
The standard color is red-oxide.
Normally supplied in 100 foot lengths, but custom lengths are also available.
The standard color is red-oxide.
Normally supplied in 100 foot lengths, but custom lengths are also available.
High Temperature Fiberglass Tape with Silicone Rubber Coating
This Tape is fabricated from a knitted fiberglass yarn substrate, and is available in 5 standard widths: 1", 2", 3", 4" and 5" wide (25, 51, 76, 102 and 127mm wide).
This Tape is used in situation where it may not be feasable to install firesleeve, such as when it is not possible to disassemble a hose connection. This tape can also be used to wrap complex shapes or varying dimension tapered pipes. Typically, the tape is overlaped by 50% when winding, which provides the entire assembly with stability. Safety wire, band clamps, ties or End Wrap Tape can be used to secure the tape in place after installation.
This Tape is used in situation where it may not be feasable to install firesleeve, such as when it is not possible to disassemble a hose connection. This tape can also be used to wrap complex shapes or varying dimension tapered pipes. Typically, the tape is overlaped by 50% when winding, which provides the entire assembly with stability. Safety wire, band clamps, ties or End Wrap Tape can be used to secure the tape in place after installation.
High Temperature Silicone Rubber Coated Fiberglass Tape Withstands 500°F/260°C continuous exposure; Molten Splash at 2200°F/1205°C for periods up to 15 minutes and short
excursions to 3000°F/1650°C.
excursions to 3000°F/1650°C.
Firetape HD: High Temperature Silicone Rubber Coated Fiberglass
Heavy Duty Woven Tape & Wrap: Non-Adhesive
Heavy Duty Woven Tape & Wrap: Non-Adhesive
Heavy Duty Woven fiberglass (fibreglass or glass-fibre) tape coated with high temperature silicone rubber.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous.
High Temperature Fiberglass Tape with Silicone Rubber Coating
Part Number T-FG-SR
Part Number T-FGHD-SR